33/4" x 1/2" x 1/2" Brass Lead Free Pex Barb Insert Tee Makes A 1/2

3-3/4" x 1/2" x 1/2"; Brass; Lead Free Pex Barb Insert Tee; Makes A 1/2" Branch From A 3/4" Run Of Cross Link Polyethylene Pex Tubing; To Secure The 1/2" Barb End Of Fitting To 1/2" Pex Pipe May Use With TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool; Or Copper Crimp Rings & Crimp Tool; Secure 3/4" Barb End Of Fitting To 3/4" Pex Pipe With TV# 608826 Cinch Clamps & TV# 608743 Cinch Tool; Or Copper Crimp Rings & Crimp Tool; Not Included; Immediately Testable To Well Over 100 PSI; Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water; ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.

SHARKBITE/CASH ACME
Model No UC454LFA
UPC 697285605220

Width 4 in Length 7 in Height 1 in Weight 1.12 Lbs

China

This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov